Learn More About Precision Group Products
Precision Group product solutions are built to strengthen future networks and simplify the end-user experience.
-
The T-7000 FlexPlate was designed specifically for the Adtran 631qv and 632v ONTs. Created with the ultimate cable management and flexibility to house up to two Keystone Jacks for either Precision to pre-load or for you to do in the field. When combined with our ability to Laser your Logo and/or QR Code, the customer premises can be set up for future Self-Installs.
-
The Calix 1101 FlexPlate sets itself apart with great cable management and preparing the customer premise for future self-installs by offering (2) Keystone Ports for Ethernet and POTS and optional Laser engraving of logo and/or QR Code. All this gives a clean and secure install for your ONT and advertising with logo.
-
The bullet adapter was designed to work with our bullet series fiber assemblies to stop the need for tape during installation. Simply screw the bullet adapter onto our bullet jumper, then screw on your existing glow rod and pull for installation. Allowing for smaller holes and less damage to connectors, the bullet adapter will increase speed and efficiency of installs while reducing penetration side to customer residence.
-
-
The Cable Spool Caddy was designed to support the MFLEX-DB and ONT NID I/O Spool options. Using the Cable Spool Caddy allows for proper pulling direction to limit unwanted bending of the fiber during installation. Designed with RED color to prevent loss during install and includes stakes that can be used to route fiber around corners in yard.
-
The Mud Ring is built for use in Low Voltage applications where there is not gang box. Simply level plate to wall to draw out the cut area, cut out the sheet rock, screw on the Mud Ring and you are ready for placing a jack or ONT enclosure securely to the wall. Low Voltage Mud Rings are common use for Enterprise and Broadband applications.
-
-
Precision Fiber CEx modules support your migration to next-generation PON services while controlling costs. Additional wavelengths enable existing PON services to coexist with XGS-PON and Upgrade Port for RF and/ or OTDR. Premium optical components and high-quality connectivity ensure superior performance, the lowest loss, and robust network reliability. Upgrading your existing passive optical network (PON) enables increased data speed and the delivery of additional services without fully replacing existing PON infrastructure.
-
Designed for optimal slack storage and rapid installation, the All NEW Express NID and optional Express Basket provides the total side of premise solution for your Field Technician. With combined capacity of 100ft of Precision Micro Drop, the Express NID leads the Industry in fiber storage for a single family unit demarcation NID. A perfect solution for preconnectorized or patch and splice drop deployment to the home. Compare Our NIDs Compare Our NIDs Download Compare Our Grommets
-
Specifically designed to go from the outdoor NID to the indoor ONT. The Bend Insensitive glass allows for bending and stapling. The I/O jacket protects against UV and extreme weather. The bullet connector housing option allows for drilling smaller holes during installation and allows use of our bullet adapter and glow rod. Precision Group stocks Superior Flex jumpers in SCA-SCA of 25, 50, 75, 100 or 150ft lengths of 3mm, in standard or armored. We will be happy to make custom lengths and custom connector combinations per your specifications.
-
The MFLEX-DB-1000 is our MIDsized FlexNID optimized for maximum cable management and storage capability for standard I/O jumpers. Compare Our NIDs Compare Our NIDs Download Compare Our Grommets
-
The Precision Fiber Micro Drop is a Lower Profile version of our Flat Drop product offering. Precision Micro Drop will allow users to fit more drops in a smaller space. It's low profile also makes it more flexible for easier pulling and cable management. Our PFMD Bulk product comes standard in 2500′ lengths on a reel. Our 1 fiber options also come on 5000’ lengths on a reel. Other sizes can be requested with an MoQ. Available in both Toneable and Non-Tonable versions to support Underground or Aerial installations. This product can also be purchased in single or dual fiber configurations.
-
The Precision Fiber Micro Drop is a Lower Profile version of our Flat Drop Product Offering. Precision Micro Drop will allow users to fit more drops in a smaller space. It's low profile also makes it more flexible for easier pulling and cable management. PFMD is available in multiple lengths. It can be connectorized on one or both ends with Optitap Compatible, SC or LC connectors. Available in both Toneable and Non-Tonable versions to support Underground or Aerial installations.
-
This 48 V Battery System delivers the most efficient and cleanest, long-life battery backup solution to (+/-) 48Vdc Telecommunications Systems. Precision Group’s lithium iron phosphate (LiFePO4) was developed specifically for Telecom equipment as a drop-in replacement to legacy Sealed Lead Acid Batteries, the ease of installation, integrated Battery Management System (BMS), onboard SNMP, and maintenance-free design offers the industry’s future for Telecom Standby Power.
-
This 48 V Battery System delivers the most efficient and cleanest, long-life battery backup solution to (+/-) 48Vdc Telecommunications Systems. Precision Group’s lithium iron phosphate (LiFePO4) was developed specifically for Telecom equipment as a drop-in replacement to legacy Sealed Lead Acid Batteries, the ease of installation, integrated Battery Management System (BMS), onboard SNMP, and maintenance-free design offers the industry’s future for Telecom Standby Power.
-
-
Specifically designed to go from the outdoor NID to the indoor ONT. The YOFC G.657.B3, Bend Insensitive glass allows for bending and stapling. The I/O jacket protects against UV and extreme weather. The detached connector housing option allows for drilling smaller holes during installation. We will be happy to make custom lengths and custom connector combinations per your specifications.
-
Specifically designed to go from the outdoor NID to the indoor ONT. The Bend Insensitive glass allows for bending and stapling. The I/O jacket protects against UV and extreme weather. The detached connector housing option allows for drilling smaller holes during installation. Precision Group stocks Superior Flex jumpers in SCA-SCA of 10, 25, 50, 75, 100 or 150ft lengths. We will be happy to make custom lengths and custom connector combinations per your specifications.
-
Improving on Precision Group’s wildly popular Indoor/Outdoor jumper offerings, the Superior Flex Armored Jumper offers more durability and flexibility. Made with the same Bend insensitive glass as our Superior Flex PR1 series, these jumpers take protection a notch further with an inner steel lining and a Kevlar® jacket inside the UV resistant outer layer. Precision group stocks Superior Flex Armored Jumpers in SCA-SCA of 25, 50, 75, 100 or 150ft lengths. We will be happy to make custom lengths and custom connector combinations per your specifications.
-
-
Specifically designed for those wanting the best bend radius possible in their pigtail. The YOFC G.657.B3, Bend Insensitive glass allows for bending and stapling. The I/O jacket protects against UV and extreme weather. We will be happy to make custom lengths and custom connector combinations per your specifications.
-
Improving on Precision Group’s wildly popular Indoor/Outdoor Pigtail offerings, the Superior Flex A2 Armored Pigtail offers more durability and flexibility. Made with the same Bend insensitive glass as our Superior Flex A2 series, these pigtails take protection a notch further with an inner steel lining and a Kevlar® jacket inside the UV resistant outer layer.
-
Specifically designed to for the extreme weather when splicing to your Drop Fiber. The Bend Insensitive glass allows for bending as needed inside the NID and a great compliment to our FlexNID lineup. The I/O jacket protects against UV and extreme weather. Precision Group stocks Superior Flex Pigtails SCA-Blunt in 3 and 5ft lengths. We will be happy to make custom lengths and custom connector combinations per your specifications.
-
Designed for indoor use. Most often used in Central Office, Data Center, Headend, Cabinet or end user locations.
-
-
-
Improving on Precision Group’s wildly popular Indoor/Outdoor Bulk Fiber offerings, the Superior Flex Armored Fiber offers more durability and flexibility. Made with the same Bend insensitive glass as our Superior Flex A2 Series, this fiber takes protection a notch further with an inner steel lining and a Kevlar® jacket inside the UV resistant outer layer.
-
Specifically designed to go from the outdoor ONT NID or MFLEX-DB NID to the indoor ONT. The Bend Insensitive glass allows for bending and stapling. The I/O jacket protects against UV and extreme weather. We offer the spool in our A2, A2 Armored and B3 jumpers in both 3mm and 4.8mm. The spools can also use a Bullet Connector or the SCA with one housing connector detached allowing for smaller holes to be drilled. Standard lengths for 3mm are 25, 50, 75, 100 and 150ft (Armored or non) and for 4.8mm 25, 50 and 75ft.
-
At a lower cost and slimmer profile, the Precision Group Low-Profile Wall Plate (PFLP3) offers compact functionality as a fiber transition jack. Combine practicality with aesthetic appeal in FTTH and MDU fiber optic installations. The PFLP3 seamlessly fits onto a Single Gang wiring wall box or can be directly mounted to the wall. Provide a secure hub for slack storage and fiber connections, safeguarding your network infrastructure.
-
At a lower cost and slimmer profile, the Precision Group Low-Profile Wall Plate (PFLP2) offers compact functionality as a fiber transition jack. Combine practicality with aesthetic appeal in FTTH and MDU fiber optic installations. The PFLP2 seamlessly fits onto a Single Gang wiring wall box or can be directly mounted to the wall. Provide a secure hub for slack storage and fiber connections, safeguarding your network infrastructure.
-
The MFLEX-DB-1001 (Spool Compatible) integrates with Precision Group’s new line of pre-loaded I/O jumper spools. This Flex Line NID is also compatible with our wide selection of input and output grommets, offering the ability to accommodate round drop, flat drop, or I/O fiber using a unique set of flex-lock split and conduit grommets that ensure cable entries remain protected from the elements. Compare Our NIDs Compare Our NIDs Download Compare Our Grommets
-
At a lower cost and slimmer profile, the Precision Group Low-Profile Wall Plate (PFLP1) offers compact functionality as a fiber transition jack. Combine practicality with aesthetic appeal in FTTH and MDU fiber optic installations. The PFLP1 seamlessly fits onto a Single Gang wiring wall box or can be directly mounted to the wall. Provide a secure hub for slack storage and fiber connections, safeguarding your network infrastructure.
-
The transition plate was designed to retrofit the outdoor ONT NID for use with Indoor ONTs. Often, customers continue to use the ONT NID even after moving indoors but have no way to deal with slack management. Problem solved! Simply snap the Transition Plate into the NID where the outdoor ONT once sat and you are ready to deploy with clean cable management.
-
Ideal for FTTx PON Networks, Planar lightwave circuit (PLC) splitters offer a compact size, high reliability, and wide operating wavelength range. With today's distributed networks PLC splitters are the perfect low cost solution to support any application requiring uniform optical power splitting from 1x2 up to 2x64 combinations. Install anywhere within the network, including rackmount, FDH Panels, Splice Cases, or Fiber Optic Termination NID.
-
-
